You may experience problems with your HP Computer or laptop running Windows 10, and this can frustrate you greatly. There are many solutions, but none that work. This could be due to an incompatible software update, Windows hanging, or a hardware problem. Faulty Windows Update or a corrupted Windows boot loader could be the main cause.
Solution To The Problem:-
- Turn off your laptop first.
- After that, take out the battery.
- You will now need to remove the AC adapter.
- You must also press the power button for approximately 15 seconds.
- This is the final step.
- Turn on your laptop to check if the problem has been resolved.
Troubleshooting Steps If HP Computer Doesn’t Turn On Following Windows Update
If your Windows PC is still not turning on after an update, you can attempt to hard reset it and check if it persists. Here are the steps:
- To turn off the computer completely, first press and hold down the power button.
- You will now need to unplug any cords or external devices that were attached to the device.
- Next, press the power button to turn on your computer. Wait for the computer to turn on.
- If the problem persists, you can move on to the next step and do some basic hardware checks.
- Turn off your computer and turn it back on.
- At the same time, click the “Esc” key and continue clicking until you see a logo.
- Click on the F2 key to open the HP Startup Menu. This will open System Diagnostics.
- Follow the prompts at the bottom to start the System test. Then, take a quick test.
- Once you have done this, you can start to check for hardware issues.
HP Computer Won’t Launch Windows 10
- These steps will help you reset Windows 10 if your HP desktop is unable to boot.
- At first, continue to press the F11 key continually.
- When “Choose a option” appears on your screen, stop.
- Click on “Troubleshoot” and then “Reset this computer”.
- You can choose the “Keep my Files” option if you don’t wish to lose any important files.
- If saving files didn’t work, you can choose to “Remove” instead.
- When asked if you would like to delete files from all drives or only the one where Windows has been installed, you can select the option and proceed to the next step.
- Select “Just delete my files” to continue.
- After you have marked your choices for everything, click the “Reset” button.
- After the reset is completed, you can reinstall any software or applications you want to use again.
If none of the above solutions worked, you can contact the HP Customer Support (817) 442-6643 . They will be there to help you throughout the entire process. For trouble-free troubleshooting, you can also repeat the steps in an ordered manner.